General Purpose


Burkert - Type 0131 Toggle valves 2/2 or 3/2 way direct-acting


The 0131 valve is a direct-acting toggle valve. Various seal material combinations are available depending on the application. Thanks to the diaphragm-separation between actuator and fluid body, aggressive media such as acids and alkaline solutions can also be safety controlled. The offering is rounded out with plastic housings made of PVC or PVDF. The coils are moulded with a chemically resistant epoxy. 'Kick and drop' electronics are moulded into all DC variants for reduced electrical power consumption. An optional electric feedback function reliable detects the switching position. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65.

  • Direct-acting, media separated valve with diameter of up to DN 25
  • Vibration-proof, block screwed coil system
  • Energy-saving power reduction in all DC versions
  • Increased safety with electric position feedback

Robust, service-friendly manual override

Burkert - Type 0142 Diaphragm valve 2/2 way servo-assisted


The 0142 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and methods of operation are available depending on the application. Housings available in PVC or PVDF complete the offering. The 3/2-way pilot valve can be easily converted from NC to NO functioning principle by rotating it on the main seat. The pilot valve position feedback can take place with a switching or NAMUR signal. The solenoid coils are moulded with a chemically resistant epoxy. The 0142 is equipped with manual override for commissioning and testing. For reduced energy requirement, all coils can be delivered with electronic power reduction. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 and NEMA 4X.

  • Servo-assisted diaphragm with diameter of up to DN50
  • Plastic valve for aggressive and contaminated media
  • Media separated, metal-free version
  • Service-friendly manual override
  • Switching reliability with feedback function (available as an option)

Burkert - Type 0255 Direct-acting 2/2 way plunger valve


The direct-acting plunger solenoid valve Type 0255 is also suitable for high pressures and high temperatures.

  • Push-over solenoid system
  • Compact design, up to DN 6
  • Housing made of brass or stainless steel with threaded connection

Burkert - Type 0290 Servo-assisted 2/2 way diaphragm valve


The 0290 valve is a servo-assisted solenoid valve of the S.EV series. The valve opens without differential pressure. The opening process is supported by the fixed coupling of the diaphragm to the plunger. In the process, the integrated 'soft-kick' function opens in a manner that is gentle on the material. Various diaphragm material combinations are available depending on the application. The range of housings is rounded off by stainless steel and cast iron versions. The solenoid coils are encapsulated with a chemically resistant epoxy. 'Kick and drop' electronics are moulded into all DC versions for reduced electrical power consumption. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 and when in combination with a stainless steel or plastic housing then NEMA 4X.

  • Servo-assisted diaphragm valve with diameter of up to DN50
  • Hard-coupled diaphragm opens without differential pressure
  • Vibration-proof, block screwed coil system
  • Damped design for quiet closing
  • Energy-saving power reduction in all DC versions

Burkert - Type 0330 Direct-acting 2/2 or 3/2 way pivoted armature valve


The 0330 valve is a direct-acting, media separated pivoted armature valve. It is available in 3/2- and 2/2-way versions. As a 3/2-way version, it can be used as a distributor or mixing valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Stainless steel (316L), PVDF, and polypropylene housing versions complete the offering. The solenoid coils are moulded with a chemically resistant epoxy. The 0330 is equipped with manual override for commissioning and testing. For reduced energy requirements all coils can be delivered with electronic power reduction or as an impulse version. The switching status can be indicated with position feedback as a binary or NAMUR signal. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65/67 – in combination with a stainless steel or plastic housing NEMA 4X.

  • Direct-acting, media separated valve with diameter of up to DN 5
  • Maintenance-free pivoted armature technology
  • Vibration-proof, block screwed coil system
  • Suitable for aggressive alkaline and acidic solutions
  • Service-friendly, robust manual operation

Burkert - Type 0331 Direct-acting 2/2 or 3/2 way pivoted armature valve


The 0331 valve is a direct-acting, media separated pivoted armature valve. It is available in 3/2 and 2/2-way versions. As a 3/2-way version, it can be used as a distributor or mixing valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Stainless steel (316L), PVDF, and polypropylene housing versions complete the offering. The solenoid coils are moulded with a chemically resistant epoxy. The 0331 is equipped with manual override for commissioning and testing. For reduced energy requirements all coils can be delivered with electronic power reduction or as an impulse version. The switching status can be indicated with position feedback as a binary or NAMUR signal. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65/67 – in combination with a stainless steel or plastic housing NEMA 4X.

  • Direct-acting, media separated valve with diameter of up to DN 4
  • Pilot valve with Bürkert-specific flange design (SFB)
  • Maintenance-free pivoted armature technology
  • Suitable for aggressive alkaline and acidic solutions
  • Service-friendly, robust manual override

Burkert - Type 5282 Servo-assisted 2/2-way diaphragm valve


The 5282 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and circuit functions are available depending on the application. The standard brass body satisfies all European drinking water requirements. The body offering is completed with stainless steel and grey cast iron versions. The 3/2-way pilot valve can be easily converted from NC to NO circuit function by rotating it on the armature. The solenoid coils are moulded with a chemically resistant epoxy. The 5282 is equipped with manual override for start-up and testing. In combination with a plug acc. to DIN EN 175301-803 Form A and stainless steel body, the valves satisfy the requirements of NEMA 4X.

  • Servo-assisted diaphragm valve up to DN65 orifice
  • Separating diaphragm for aggressive and contaminated media
  • Closing and opening times can be adjusted individually
  • Explosion-proof versions (Cat.2)
  • Service-friendly manual override

Burkert - Type 5404 2/2-way Servo-assisted piston valve


The 5404 valve is a servo-assisted piston valve available in NC and NO versions. A minimum differential pressure is required for the valve switching function. The solenoid coils are moulded with high-quality epoxy resin. In combination with a plug to DIN EN 175301-803 Form A, the valves satisfy degree of protection IP65. The plug is not included and must be ordered separately.

  • Servo-assisted piston valve with an orifice up to DN50
  • Explosion proof versions for Cat. 2
  • Suitable for gas and steam applications up to 160°C
  • Relief valves for compressors

Burkert - Type 5406 2/2 way servo-assisted Piston valve


  • Push-over solenoid system
  • NC valves, certified in accordance with DIN EN ISO 23553-1
  • Supply or circulation valve for liquid fuels
  • IP 65

Burkert - Type 5407 Direct-acting 2/2 way lifting armature valve


  • Push-over solenoid system
  • NC valves, certified in accordance with DIN EN ISO 23553-1
  • Return valve for liquid fuels
  • IP 65

Burkert - Type 6013 Plunger valve 2/2 way direct-acting


Valve 6013 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant epoxy. Pulse coils and 'Kick and Drop' electronics are available for overexcitation (plug 2511) for the reduction of electrical power consumption during operation. Optional manual actuation enables quick commissioning and easy maintenance. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.

  • Direct-acting and compact valve up to diameter of DN 6.0
  • Vibration-proof, bolted coil system
  • Increased leak-tightness with welded plunger guide tube
  • Explosion proof versions
  • Energy-saving pulse versions

Burkert - Type 6027 Direct-acting 2/2 way plunger valve


Valve 6027 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearing increases the service life with dry gases. Special seal technology is used for high-pressure applications. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.

  • Direct-acting, powerful valve with diameter of up to DN13
  • Vibration-proof, bolted coil system
  • Increased leak-tightness with welded plunger guide tube
  • Explosion proof versions
  • High pressure variants for gases and liquids

Burkert - Type 6213 Servo-assisted 2/2 way diaphragm valve


The 6213 EV valve is a servo-assisted solenoid valve of the S.EV series. The spring coupling of the diaphragm supports the opening process of the valve. In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for complete opening. A special version (HP00) which opens the valve without differential pressure is available for gas and vacuum applications. Various diaphragm material combinations are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded off with a stainless steel version. For reduced energy requirement, all coils can be delivered with electronic power reduction. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X.

  • Servo-assisted diaphragm with diameter of up to DN40
  • Spring coupled diaphragm opens without differential pressure
  • Vibration-proof, screwed coil system
  • Damped design for quiet closing
  • Compact construction with high flow rate

Burkert - Type 6240 Servo-assisted 2/2 way piston valve


The 6240 valve is a servo-assisted piston valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The housing design and surface quality enable maximum flow rates. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearings increases the life cycle with dry gases. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.

  • Servo-assisted and compact piston valve with diameter of up to DN 13
  • Vibration-resistant , screwed coil system
  • Increased leak-tightness with welded plunger guiding tube
  • Safe opening with hard-coupled piston system
  • Explosion proof versions

Burkert - Type 6281 Servo-assisted 2/2 way diaphragm valve


The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded out by a stainless steel version. For reduced energy requirement, all coils can be delivered with electronic power reduction. The valve can be equipped with manual override for easy maintenance and commissioning. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X.

  • Servo-assisted diaphragm with diameter of up to DN50
  • Vibration-proof, central screwed coil system
  • Damped design for quiet closing
  • Service-friendly manual override
  • Explosion-proof versions

Burkert - Type 6407 Servo-assisted 2/2-way piston valve


Type 6407 valve is a servo-assisted piston valve. The fix coupling between pilot valve and piston provides an opening of the valve without pressure difference. As a piston valve, the Type 6407 is particular suitable for media such as gas and steam. As well as liquids with low operating temperature below 0°C.The stopper and the core guide pipe are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The coils are moulded with chemically resistant epoxy. To reduce power consumption in operation, coils with "Kick and Drop" (KD) electronics (double coil technology) are available. In combination with a plug acc. to DIN EN 175301-803 Form A, the valves satisfy IP65 degree of protection.

  • Servo-assisted piston valve up to DN50 orifice
  • Safe opening with hard-coupled piston system without differential pressure
  • Vibration-resistant, push-over coil system
  • Explosion-proof versions
  • Energy-saving double coil technology with kick and drop design

Burkert - Type 0340 Piston valve 3/2 way servo-assisted


The 0340 valve is a servo-assisted 3/2-way piston valve. A minimum differential pressure is required for the valve to function. A maintenance-free, media separated 3/2-way pivoted armature valve (type 0331) is used as a pilot valve. The pivoted armature valve can be easily converted from NC to NO functioning principle by rotating it on the main seat. The solenoid coils are moulded with a chemically resistant epoxy. The 0340 is equipped with manual override for commissioning and testing. For reduced energy requirements all coils can be delivered with electronic power reduction or as an impulse version.. The switching status can be indicated with position feedback as a binary or NAMUR signal. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65.

  • Servo-assisted piston valve with diameter of up to DN 40
  • Increased operational safety with pivoted armature technology
  • Service-friendly manual override
  • Energy-saving impulse versions
  • Explosion proof versions

Burkert - Type 0355 Plunger valve 3/2-way direct-acting


Direct-acting plunger solenoid valve Type 0355 for controlling hot media such as steams, oils and gases

  • 3/2-way seat valve direct-acting
  • Push-over coil system
  • Medium temperature up to +180°C
  • for liquid and gaseous media

Burkert - Type 6012 Plunger valve 3/2 way direct-acting


Valve 6012 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. A banjo connection with banjo bolt is the ideal solution for easy direct mounting on a pneumatic drive. Optional manual actuation enables quick commissioning and optimal maintenance. In combination with a plug in accordance with DIN EN 17301-803 Form B or C, the valves satisfy protection class IP65.

  • Direct-acting, compact small-format valve with diameter of up to DN 1.6
  • Screwed coil system
  • Banjo threaded connection for direct mounting on pneumatic valves
  • Simple and quick push-in, flange, or manifold installation
  • Service-friendly manual override

Burkert - Type 6014 Plunger valve 3/2 way direct-acting


Valve 6014 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant epoxy. Pulse coils are available for the reduction of electrical power consumption during operation. Optional manual actuation enables quick commissioning and easy maintenance. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.

  • Direct-acting, compact valve with diameter of up to DN 2.5
  • Vibration-proof, bolted coil system
  • Banjo threaded connection for direct mounting on pneumatic valves
  • Service-friendly manual override
  • Energy-saving pulse versions

Burkert - Type 6724 2/2 or 3/2 way Whisper Valve with media separation


Many fluidic processes come closer to the point of interest. For example medical devices like dialysis machines become homecare devices and operate close to the patient. Washing units in analytical equipment are positioned on the pipetting arm or directly on the print head in printing applications. This requires special components. Solenoid valves need to switch without noise. They need to be smaller and lighter. Nevertheless it is essential to guarantee a long lifetime and excellent switching characteristics. All this is concerted in the Whisper Valve type 6724 and thanks to the modular structure and the range of available materials this valve is almost universal.

  • Highest chemical resistance
  • Compact design with 8.9 mm width
  • Orifice size 0,8 mm (vacuum up to 5 bar [72,5 psi]) and 1.2 mm (vacuum up to 3 bar [43.5 psi])
  • Very fast, almost silent switching with < 20 dB (A) and very low power consumption
  • High back pressure tightness, excellent cleanability and 100% duty cycle

Other


Burkert - Type 0131 Toggle valves 2/2 or 3/2 way direct-acting

Burkert - Type 0131 Toggle valves 2/2 or 3/2 way direct-acting


อ่านต่อ

Burkert - Type 0142 Diaphragm valve 2/2 way servo-assisted

Burkert - Type 0142 Diaphragm valve 2/2 way servo-assisted


อ่านต่อ

Burkert - Type 0255 Direct-acting 2/2 way plunger valve

Burkert - Type 0255 Direct-acting 2/2 way plunger valve


อ่านต่อ

Burkert - Type 0290 Servo-assisted 2/2 way diaphragm valve

Burkert - Type 0290 Servo-assisted 2/2 way diaphragm valve


อ่านต่อ

Burkert - Type 0330 Direct-acting 2/2 or 3/2 way pivoted armature valve

Burkert - Type 0330 Direct-acting 2/2 or 3/2 way pivoted armature valve


อ่านต่อ

Burkert - Type 0331 Direct-acting 2/2 or 3/2 way pivoted armature valve

Burkert - Type 0331 Direct-acting 2/2 or 3/2 way pivoted armature valve


อ่านต่อ

Burkert - Type 5282 Servo-assisted 2/2-way diaphragm valve

Burkert - Type 5282 Servo-assisted 2/2-way diaphragm valve


อ่านต่อ

Burkert - Type 5404 2/2-way Servo-assisted piston valve

Burkert - Type 5404 2/2-way Servo-assisted piston valve


อ่านต่อ

Burkert - Type 5406 2/2 way servo-assisted Piston valve

Burkert - Type 5406 2/2 way servo-assisted Piston valve


อ่านต่อ

Burkert - Type 5407 Direct-acting 2/2 way lifting armature valve

Burkert - Type 5407 Direct-acting 2/2 way lifting armature valve


อ่านต่อ

Burkert - Type 6013 Plunger valve 2/2 way direct-acting

Burkert - Type 6013 Plunger valve 2/2 way direct-acting


อ่านต่อ

Burkert - Type 6027 Direct-acting 2/2 way plunger valve

Burkert - Type 6027 Direct-acting 2/2 way plunger valve


อ่านต่อ

Burkert - Type 6213 Servo-assisted 2/2 way diaphragm valve

Burkert - Type 6213 Servo-assisted 2/2 way diaphragm valve


อ่านต่อ

Burkert - Type 6240 Servo-assisted 2/2 way piston valve

Burkert - Type 6240 Servo-assisted 2/2 way piston valve


อ่านต่อ

Burkert - Type 6281 Servo-assisted 2/2 way diaphragm valve

Burkert - Type 6281 Servo-assisted 2/2 way diaphragm valve


อ่านต่อ

Burkert - Type 6407 Servo-assisted 2/2-way piston valve

Burkert - Type 6407 Servo-assisted 2/2-way piston valve


อ่านต่อ

Burkert - Type 0340 Piston valve 3/2 way servo-assisted

Burkert - Type 0340 Piston valve 3/2 way servo-assisted


อ่านต่อ

Burkert - Type 0355 Plunger valve 3/2-way direct-acting

Burkert - Type 0355 Plunger valve 3/2-way direct-acting


อ่านต่อ

Burkert - Type 6012 Plunger valve 3/2 way direct-acting

Burkert - Type 6012 Plunger valve 3/2 way direct-acting


อ่านต่อ

Burkert - Type 6014 Plunger valve 3/2 way direct-acting

Burkert - Type 6014 Plunger valve 3/2 way direct-acting


อ่านต่อ

Burkert - Type 6724 2/2 or 3/2 way Whisper Valve with media separation

Burkert - Type 6724 2/2 or 3/2 way Whisper Valve with media separation


อ่านต่อ